|
Immediately after my last post I was playing with antenna configurations. When I returned the original setup with the loop antenna, the problem was gone. The only change I made was a tiny tweek on the loop antenna trimmer, just to see if the screw would turn easily. Now I have strong, clear reception with lots noise between stations.
The hum (or whatever) was familiar to me because I had in VCR that did that back in the 1980s.
I will work on the filament voltage/current issues, then see if I figure out how to align the set. Thanks for the help.
__________________
Winky Dink
Damn the patina,
Full speed ahead!
|