Quote:
Originally Posted by Dreamsbeard
As I was reading this article :
http://personalpages.tds.net/~rcarls...s/converge.txt
I came upon the section about convergence, and the article says that the blue gun can only be ajusted alone in an horizontal axis...is that true? As stated before the only gun needing adjustment is the blue one, and it needs to come down on a vertical axis...is there a way of only adjusting the blue gun that way, or do I have the play with the other guns as well?
Thanks! |
Dunno the arrangement Hitachi used, but here's the typical magnet arrangement - the purity rings are closest to the funnel (farthest from the clamp), and then you have the two sets of magnets - aft (closest to the CRT socket) is the 6 pole, and in the middle is the 4 pole. The attached images explain it better than I ever could.
Cheers,
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"
When fuses go to work, they quit!
Last edited by Findm-Keepm; 09-29-2017 at 06:38 PM.
|