|
How do I isolate one of the 130 v circuits if all the voltages are the same on all the 130v circuits? Would pulling one tube at a time and measuring the voltage on a correctly working 130V circuit increase the voltage further? If the voltage doesn't increase then I've found the culprit circuit...right?
You did give me some food for thought. One of the IF 6cb6 tubes wouldn't light up unless it was wiggled in the right position. When I get home I'll resolder the terminals on the tube sockets in the IF stage. I'll also go over some resistors I might have missed.
Thanks,
Matt Davala
|