Quote:
Originally Posted by timmy
bright down the hv adjust does work and can get 23kv but only if the pot is maxed and on different scenes the hv drops off like it is not regulating and this is why i was wondering about the resistors. the hv adjustment dont have much gain to it and the reg tude does get hot like its working and in the dark if i raise and lower the hv adjustment the tube will glow with alittle blue to it depending on up or down adjusting and i have tried several reg tubes in the past and all the same result. but i will have to check the ma in that hv circuit.
|
with the brightness all the way down what is the max HV you can get with the HV adj pot fully CW.