[timmy]

ok here are some voltages, i hope im right with the wires here. ok the yellow with colors is cathode,blue 280.9v green 276.8 red 245.3. g2 white with colors, drives maxed red 760v blue 757v green759v. g1 solid colors red 195.7v blue 186v green 193.6 . with the set on warmed up bright down hv adjust maxed cant get no more the 23kv it does vary via the adjustment so its working but something is wrong in the circuit. i also tried pulling the crt plug off no change in hv. however i didnt yet pull the 6bk4 cap off to see if the hv goes up the last time i pulled the cap off it did go up much more. i also checked the ohms again on the hv adjust pot and its good. so i guess the boost voltage is there as it shows on the maxed drives.