|
Dave,
Thanks a lot for taking the time to send the pictures of the correct knobs and face plate from your set. The illustrations in Fink's book of color television theory were also helpful.
I have heard of 3D printing although have no run time with the technology. I will contact UPS and learn more about their capabilities and constraints. Reproducing the knobs will be tough, but the face plate seems more difficult to fabricate, especially with the crosshatch pattern etched into the aluminum face plate. Perhaps the crosshatch pattern could be achieved by acid etching the aluminum.
I"ll investigate further with some 3D printing sources in addition to UPS and report my findings back to the group.
Thanks again for everybody's help.
Jeff
|