Quote:
Originally Posted by Electronic M
I'd check the schematic and see if you have all the leads on that coil sticking out far enough to solder. If so you could tack on about an inch of fine gauge wire to the stubs, glue the base back in, and solder the extenders to the terminal posts....I've had to deal with the kind of damage you picture before and the above procedure was the way I fixed it.
|
Ya, I thought of that.. I think there is enough leaded wires coming out.. I'm not sure if there is 2 or 4 wires..
__________________
Looking for an all tube or hybrid color TV set from the late 1960s, early 1970s that's in a steal cabinet..
|