[fsjonsey]

I soldered in the new VDR. HV control is back, but the picture is still shrunken horizontally on the bottom third of the screen. It gets worse as the set warms up. I know for a fact that the Yoke is not the issue, as this is a NOS Thordarsen replacement. Once the set warms up, the bottom corners of the CRT shrink to black and the picture almost looks like a trapezoid. There are three white vertical lines centered in the bottom of the screen that fade out about a third of the screen up. Where the ticker on a cable news station would go, as an example, the text passes these lines, it shrinks and expands back to a normal size as it passes the vert. lines.

I really need help with this. I'm stumped.