|
I'm getting a few film caps that the sams calls for, but when I pull the cap, it's a different value.. For instance: Sams says C58 is a .047 300v but I pulled the cap out and looked at it and it reads .022 200v... I'm not sure if this was replaced at one time with a value that's close enough, or if the Sams is wrong..
Some of these caps from mouser is questionable... I'm looking at a replacement compared to one that's installed in the set, and it's tiny compared to the original in the set.. All others are about the same size or slightly bigger or smaller than the original caps.. I don't think I want to install some of these tiny caps...
So far I replaced about 4 or 5 of them, and did a power up test and set is fine.. I didn't make any mistakes...
__________________
Looking for an all tube or hybrid color TV set from the late 1960s, early 1970s that's in a steal cabinet..
Last edited by tvcollector; 01-05-2015 at 05:39 PM.
|