I went to radio shack and bought a solder terminal as Tom said... I bought solid wires And I'm using these for leads, for extenders... I drilled a hole on the side of the chassis on the upper side next to where the cans are and that's where I'm going to mount this terminal.. I'm going to use the old reference photos follow the color code wires to each shape from the original terminal than read the value of the old can to determine which lead goes to which cap.. Radio Shack had a ceramic .001 cap, So I'm replacing the little red cap that was originally mounted on the old terminals from the can.. I've got the mounted with the 22uf cap as it originally connected..
Old photo:
My new terminal mount:
I was going to Riveter it into the chassis, but I think that will be a bit hard to do without messing the job up.. I'll run over to Home Depot and buy a screw and nut and do it that way, at least for now.. I'll take pic of the crystal in a few.. Btw it glows similar to tube filament glow, but looks a bit brighter..