The most common thing for video problems on
this and almost all other brands is a cap in the 200V supply.
I dont have a manual so hears how to find it.
On CRT socket there are 3 identical transistors.
From the collectors are typically 18K 1W resistors.
Where the join is the 200V.
Follow the wire down to the area of the flyback.
the cap usually 4.7mfd use a 450V.
Sometimes the cap is on the CRT socket board.
There may be a small coil in series with the line.
Some sets use a different scheme.
Symptoms include
dark on left, too brite on right.
Retrace lines.
smearing.
Too brite.
Some sets will over current shut down.
May be intermitant.
good luck
73 Zeno
