|
I just ordered up some resistors.. I did find that 2.2meg resistor like you said, that's isolated near the .1 cap.. It measured around 3.0meg cold.. I also tested the Shunt regulator tube.. The tube chart shows a 6EA4.. There is a 6EJ4 in there.. On the tester it tests into the lower good side, and needle falls while in the test mode.. During life test it drops into the "?".. Now would this tube be causing the issue with the HV maxing out only at 22kv?
__________________
Looking for an all tube or hybrid color TV set from the late 1960s, early 1970s that's in a steal cabinet..
|