Thread: ctc12 clone beam current
View Single Post
  #3  
Old 01-16-2015, 11:20 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
  
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,445
Quote:
Originally Posted by Bill R View Post
Regulator current should be between 85 and 140 milliamps.
Don't you mean microamps (uA)? The regulator works by loading the HV so if it is drawing 140mA from a 25kV source then it would be pulling 3500W through the flyback which is impossible.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Last edited by Electronic M; 01-17-2015 at 01:11 PM.
Reply With Quote