[timmy]

the only blue wire on this flyback is soldered from one end of the 47meg and runs up to the vert board it shows this in both sams and the rca schematic. i think maybe the problem is different color wires were used for the clone and rca. looking at the coil of the fly the bottom lead #1 goes to the #2 of the f coil and the top lead #2 goes to #1 of the f coil and on the 100k resistor, also on that tap is a red wire and that goes under the chassis to the 1.5meg and on to the .12 cap. the other blue wire is from the yoke and that is in the correct place. weather top or bottom wire the numbers on the fly are right with the numbers on the f coil . at least what both rca and sams shows as to what number terminals go where from fly to f coil.