[timmy]

either way its all in the right place. the .12 cap i could not get a .12 so moyer gave me 2 different caps to make up this 12 , and i also had changed the .15 cap maybe these are bad. my problem is i dont want to switch a wire from one place to another by placing what appears to be boost on one terminal and putting it on another when both schematics show it is correct now. i just want to be sure as to the wires with colors for the crt cathodes because i will check this with the color drives at minimum .the last time i check if im right with the cathodes , the yellow wires, they ranged from 280v 276v 245v.