|
yes the 19 and 17 with the brightness at max and was able to bring the voltages near where they should be using the bright pot and raising the bias was ok and was also able to see the rgb lines in setup because the bias was up some and helped see those lines . but im sure the set was not designed to have the brightness halfway because if it moves then i would have to check voltages to get it back. almost as if the pot is raising to much, i dont know... as for the hv it starts out under 23kv and warming up it goes up but the key here is it dont jump like it did befor and sometimes it will go over 25kv and other times it wont so maybe there is something else going on here.
|