|
Yah, don't take them out...
The tubes won't have a ground, you gotta find parts on the PC boards that go to
ground on one side, and just check to be sure electrically, they are really grounded.
One way is to check the grounded part, to the metal chassis for any voltage....
It sounds strange....
Take a look at C750, it's one example of a part with one side going to ground.
On that AGC pot, disconnect the two legs that do not go to ground to test it....
AGC pot, pins 1 to 3 should be 6K thats 6,000 ohms.... The wiper will
change as you turn it you know, from the wiper to either pin 1 or 3....
.
__________________
Yes you can call me "Squirrel boy"
Last edited by Username1; 01-24-2015 at 12:46 PM.
|