Quote:
Originally Posted by Zenith6S321
I spent most of the day checking the resistor values and replacing the ones I thought were too far off. The Zenith solder cups makes it easy to lift one end to check values. I replaced all the resistors that were beyond or close to their tolerance band allowance. That ended up being 40 resistors. I like to replace resistors with higher wattage replacements, like 1W where there were 1/2 W. Next are the old non-ceramic capacitors and then the electrolytics.
|
Out of curiosity, how many resistors were bad and by how much (worst case)?
I also have one of these sets, so I'll be watching.
I notice two holes punched in the tuner bezel... Does this have an optional UHF Tuner? If so, I've never seen them arranged side-by-side on a Zenith roundie... Usually it's diagonal.