|
I spent an evening checking the values and wiring for the parts I replaced. I'm glad I did, as I found one wrong value resistor, 1.5K instead of 15K, and two other resistors each with one lead to the wrong solder cup. All the caps values and wiring were ok.
I got the Zenith Color TV Service Manual by R. L. Goodman but it did not have a schematic for the 29JC20. I did have the 27KC20 which has most of the same circuitry for the electrolytic can I was concerned about. The 27KC20 schematic, as well as some information from the Oct 62 Radio Electronics page 71 showing the vertical supply cap as 20 uF, confirmed the Sams values for the four sections of the capacitor. My set was wired as the Sams schematic and parts list section markings, but my cap has the sections with different markings. Here are pictures of the Sams parts list markings of the sections and a picture of my can. You can also see that the 22-3632 can part number matches the parts list Zenith part number. I think my set was wired wrong from the factory. Its now wired as the Sams schematic shows.
Next I'm gonna check the tube socket resistance measurements to see if I messed anything else up.
|