Quote:
Originally Posted by Electronic M
I might have one, but it will take quite some digging to find it.
Usually if the set still has HV it is not a flyback problem. Have you thoroughly cleaned the side of the CRT by the HV connection? If not do it with rubbing alcohol or windex.
|
Yes. I have cleaned it with contact cleaner on Q-Tips, all the wires, the transformer it self and the top of the CRT and the anode cap as well. It was really caked on heavily.
I also cleaned the wire going from the flyback to the board on the back of the tube it self. They were all caked with dirt.