Quote:
Originally Posted by Electronic M
though if the output amplitude is large one might need to use a voltage doubler, trippler, etc to get enough rail voltage for the OP amp....Not to mention the many other power sources both set derived and tacked in that could be devised.
|
Lets not forget the fact that these are all high impedance circuits. You could just make an "unun" transformer. So you have 1v p-p composite in, and you need 10v p-p out? 1:10 matching transformer. Phase inversion is easy if you use a 1:1 isolation transformer (There are many made just for video.) and flip the output phase. You can also combine both. Invert the phase and derive 5v p-p baseband via a swapped output 1:5 ratio unun.