[timmy]

well i am confused as well i do see that the 45 uses an 1100 ohm resistor but it looks like a factory 1250 ohm in this set and was never touched since 1965 and the hv cage shows 6gu7 tubes so i dont know where else to go to know for sure. but i did notice there is a u45 on the corner of the tag bearly visable that i didnt see before. this maggie has the degauss coil around the crt and the green gun issue is ok the crt is fine at the moment the filiment has not been a problem. so i do believe i have a series 45 but with a different resistor for some reason or maybe a type o on the part of the schematic ? is it possible that this chassis did use 6cg7 tubes because of a last minute production change back in the day? and would it do harm in trying the 6cg7 tubes. for all anyone knows maybe the set was built with the wrong resistor from day one and with everything new at that time it worked acceptable and was never noticed because it dont explain how that one got in there because it was for sure factory based on how it looks.