|
I went through the audio alignment which fixed the distortion in the sound and increased the volume a lot.
Neither of the yoke centering adjusting strings would move. I took the yoke off the CRT and was then able to move the strings a little. Working them back and forth a bit seemed to free them up. I put the yoke back on and fired up the set to try to use the centering strings. The strings moved the centering rings but for some reason the image on the CRT does not move. I wonder what I am doing wrong. The image does fill the CRT and the centering is not off by a lot. It still would be nice to get it centered though.
Dave
|