|
This may sound ridiculous, but I have to ask if anyone can verify some 3AT2 pin outs for me. Simply what I need to know is whether the jumper replacing the 1.5K resistor joins at pin #4, or pin #5 along with the crt second anode lead.
As I have said, my sockets connectors 4 and 5 both fell out, but when I first pulled the tube and discovered this I thought that #4 came out with the tube and had nothing soldered to it. The new socket has the resistor and anode lead at pin #4 which again is a blank pin. I am probably just mistaken about which connector came out with the tube. The blank pin is probably just used as a junction for the "series" resistor. If it went to #5 then it looks like both ends of the resistor or jumper would be across or shunted to the cathode by looking through the glass. I just want to wire this up right the first time and need to be sure. The schematic only shows the heater connections and plate cap. Thanks!
__________________
"Face piles of trials with smiles, for it riles them to believe that you perceive the web they weave, and keep on thinking free"
Last edited by Tubejunke; 02-17-2015 at 07:26 PM.
|