|
ok so i got the resistances and there is a 200 ohm 2- 105 ohms and a 37 ohm so if i redo this resistor network could i use 2 100 ohm 10watt resistors for the 105 ohm resistors, and a 33 ohm 3 watt for the 37 ohm and 2- 100 ohm 10 watt resistors in series for the 200 ohm ? they are alittle low on the 33 to 37 and 100 to the 105 resistors but i dont know what the wattage would be for each one. does anyone know what the hv should be at the crt ?
Last edited by timmy; 02-24-2015 at 09:45 AM.
|