View Single Post
  #25  
Old 03-09-2015, 08:21 PM
TinCanAlley's Avatar
TinCanAlley TinCanAlley is offline
VideoKarma Member
 
Join Date: Sep 2008
Location: So Cal, CA
Posts: 1,020
Quote:
Originally Posted by zeno View Post
It also may be one of the things you got hooked up
is radiating off all the extra wires involved. Try unhooking
one thing at a time ( power) if you havnt. As far as well
filtered goes take that with a grain of salt. Switching supplies
are wickid noisy. They are no different than the hoz
sweep in a TV. Both noise generators.

73 Zeno
I disconnected all devices from it and the interference was still there. The only thing that got rid of it was to unplug the PS.

I have a small access hole to the closet with all the gear. I'm going to run a lead though it to the harness supplying the devices. The PS will be outside (other side of wall) in a different AC outlet. Hopefully this will take care of it. It's amazing how much space is lost with 4 wallwarts, extension cords and associated wires.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL

Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
Reply With Quote
Audiokarma