Quote:
Originally Posted by Gregb
My Princess was really dirty as well, I used Spray Nine and q-tips as I was changing components, I have attached an after picture. Make sure you draw yourself a real good diagram before disconnecting all the wires to the board.
Gregb
|
Nice job on that PCB! On a side note, the series string sets have tubes that are extremely inexpensive. I bought several for my set even though I have not had time to work on it. There is a tube vendor in Orlando, FL who often has many of the tubes on sale for $1.00 each. The other ones for the most part are only $3.00 each and all are NOS, various brands. Tubes in my Predicta also tested very weak for the most part.