Quote:
Originally Posted by Findm-Keepm
Here's some gemane info from RE - I've encountered similar problems with the synchroguide oscillator before, but always lucked out with simple fixes, either the tube or a ceramic cap drifting.
Off frequency could also be caused by a broken slug (core). Is the S-G core good?
|
I'd imagine so, it turns freely and was good when this whole fiasco started. I've also checked the micas on the S-G (albeit with a Chinese hand held tester), and all caps off the 6SN7 and 6BG6. Everything there is good, including the tubes.
I read the articles, and it seems that perhaps I could do the adjustment with a scope. I do have one handy now, just need some guidance on doing it
