|
ok, i messed up and have no idea how i did , it was brainless as i placed the 100mmf lead on pin 5 rather then pin 2. so i have it all back and its working like it did when i first got it done that is with the vert hold pot close to one end but the vert is holding and long as it stays this way and dont get worse then thats ok. but thinking as things wear out i may need alittle more range on the hold pot for the future but then again it wont be an every day tv to watch. the blanker circuit really just gets a 220k resistor between the 250mmf and 10 meg and move #3 orange to in between the 220k and 250mmf, that will be nice if it gets rid of those lines. well with that 100mmf in the wrong place i guess anything can get you unfocused at some point and then there is when the trouble starts and this is what happened to me. i sometimes think by being to careful it can introduce mistakes, at least it seems i am this way with some things,lol. well tom you nailed down where i probably made the mistake and by having a hunch about the signal not getting to where it should be, you were right and i thankyou for your patients because this should tell some people including myself that mistakes can be made and we should not think for a minute that we didnt because i was so sure i made no mistake, but i did. so after i button up a few things with this chassis i will post some pics.
|