|
Is that a Standard-Kollsman tuner?
If you need the FT gear, it is not too hard to find. The fingers OldCoot refers to are on either side on the gear slider assembly, just out from the tuner shaft and click into slots in the tuner sheetmetal.
Standards usually had a 6HB7 tube and were used in GE and Mags, not known for good fringe reception IMAO.
Oak tuners were used in Motorola and some others, also not real good in comparison to Zenith and RCA
__________________
"When resistors increase in value, they're worthless"
-Dave G
|