|
Sams shows 23.5 ohms between 5 and 3, and 57.5 between 4 and 5.. None of the terminals are in order or labeled on the pc board for the osc coil, and the only one I can ID is the one going to ground.. I've measure between the 4 terminals in every way and I don't get anything at 23.5 ohms or 57.5 ohms.. I get 25 ohms between two of them and 65 ohms between another two, is the closest thing I can get.. I checked for continuity at the pin and the solder joint for each pin while tube is still in socket, probe of my ohm meter is thin enough... The new tube that I replaced is good but at the lower end, and it passes shorts and grid emissions..
__________________
Looking for an all tube or hybrid color TV set from the late 1960s, early 1970s that's in a steal cabinet..
Last edited by tvcollector; 04-18-2015 at 01:41 AM.
|