|
There was a bad solder joint on the old Horz Osc Coil.. Was able to get the voltages at -114 at pin 7 and -55 volts at the Horz output tube... Still I can't get the MA in the ballpark.. I can't get it under 240ma.. It also jumps around into the 300ma range when adjusting the horz hold control.. I replaced the old coil with the new one and makes no difference... I think the flyback is toast, I replaced shunt tube and other tube and hv only comes up to around 5000v..
__________________
Looking for an all tube or hybrid color TV set from the late 1960s, early 1970s that's in a steal cabinet..
Last edited by tvcollector; 04-27-2015 at 02:16 AM.
|