|
the color should have been correct, just very washed out. if it goes from very washed out to too much (cap out/cap in) then is sounds like the control is not working, check the pot, look also for any shorts, sometimes the output terminals from a pot can get moved around during chassis removal, resulting in shorted term to ground. its always best to check tube pin resistance readings with the tube installed. Depending on how its wired, an open pot ground may have the same effect. check to make sure its functioning AND the ground lead is not open.
Last edited by DaveWM; 05-22-2015 at 08:32 AM.
|