|
I measured resistance, Easier than I thought, I didn't have to pull the chassis out.. Not sure which one is pin 1, but I measured the two outer pins, one measures at 196ohms, and the other outer 000.6ohms, and they don't change adjusting the contrast pot..
The sams doesn't show any measurements on the schematic out from pin 1, just shows voltages
The pot according to the sams is a 600ohm, I measured acrossed it, and it doesn't go near it while adjusting..
__________________
Looking for an all tube or hybrid color TV set from the late 1960s, early 1970s that's in a steal cabinet..
Last edited by tvcollector; 05-22-2015 at 02:27 PM.
|