View Single Post
  #26  
Old 05-23-2015, 04:31 PM
TheShanMan's Avatar
TheShanMan TheShanMan is offline
VideoKarma Member
 
Join Date: Sep 2014
Location: Hillsboro, OR
Posts: 88
The yoke diameter (of the part that the cover goes on) is 3 1/8" and the neck diameter is 1 7/16".

Attached are the numbers on the yoke.

My yoke cover also has centering rings so if there is a yoke cover with a neck clamp that would work, hopefully it also has the rings.

As an aside, I had a bit of a scare last night. We were all watching this TV when suddenly the picture turned into a bunch of jagged lines in the center of the screen and the sound turned into noise. Fortunately I shut the power off quickly enough to prevent lasting damage. As it turned out, the yoke wires drooped onto the top of the horizontal output tube and it started shorting through the wires! I was heartbroken until I found out it didn't actually cause damage.
Attached Images
File Type: jpg 20150523_141418.jpg (70.8 KB, 7 views)
Reply With Quote