[TinCanAlley]

Originally Posted by zeno

All 9-27 boards came as kit with shield & 1/4' screw. Usually
marked 9-27 X IIRC. Your set should have had one from the factory.
There is another version but I dont remember the part #, looks
very different.
The C line sets had a different vert module but wont sub, the
controls are off board. 9-83 may be the only one as the D & E
line sets were it for flat chassii. Newer uprights all used
9-92 / 9-147 totally different till the in-line CRT's came out
& the 9-120 series came out.
The big thing to watch for is the 9-57-VCR. Its a newer hoz
module piggy backed on the old style. Cures the flagging
problem on VCR's. If you do find one be sure the right thing is
in the box, NOT just a 9-57 dud. Also I want to see one so
we can make some up.

73 Zeno.

Mine came with an entire housing covering the 9-27. It was a pain trying to adjust the pots inside of it through the holes. Seems the last person to work on it pushed too hard and broke the solder joints on one of the pots. The replacement I got was the "X" model and it didn't require the housing. It has a single piece of shielding on it and the rest is exposed. I'll post a pic.

I was looking for the 9-57-VCR module when my RCA VDT-350 was having issues, but it turned out to be the VCR, not the TV. A few tweaks here and there on the VCR and the problem is gone. Still keeping an eye out for that ever elusive VCR module, though.

If I can't find a new vertical module, I'll go ahead and rebuild it. I'm thinking I should be able to find a new module for about the price it's going to cost me ordering the parts and shipping.