|
That is a tuned rf radio. You need to check to see that when you tune the dial
each tuning capacitor is moving, and that they are in some type of alignment.
Rough alignment might be as simple as seeing if they are all in sync through
the entire range of the dial.... Then check with a signal, and a scope at each
stage to be sure each is tuned to the same frequency when the dial is at
that point.....
Looks like a really cool radio ! I'm sure you are going to have to also put up a
good antenna for that set to work well.... Good luck !
Keep up the postings, I'm interested in seeing how it goes.....
Pretty much what jr tech said....
.
__________________
Yes you can call me "Squirrel boy"
|