View Single Post
  #27  
Old 06-23-2015, 10:40 PM
SwizzyMan's Avatar
SwizzyMan SwizzyMan is offline
Restoring an admiral c322
 
Join Date: Apr 2015
Location: Side Lake Mn
Posts: 886
Quote:
Originally Posted by tvcollector View Post
To perform purity on a set, you'll need to start with red and also degauss the tube before you start... Pull the yoke back and adjust the purity rings until you get the red blotch in the middle of the screen then push the yoke forward again and see if red fills the screen without any fading...

Shango has videos that are helpful

https://www.youtube.com/watch?v=QNtsTKVPO7I
https://www.youtube.com/watch?v=1AWG61TAIHg
Ugh, I dont have a degaussing coil.
__________________

Admiral C322C2 Regent (Restoring)
RCA CTC-7 Pensbury (Restored)
RCA CTC-5 Westcott (Restored)
CRA CTC--4 Director 21 (Restoring)
Reply With Quote