Quote:
Originally Posted by DaveWM
you might have to take the 10k out of circuit to test. Not sure I understand the flux reading on the 1.8 should be steady. the 1.0 being high may be a prob but you should have enough height adj to compensate if that is the only thing off.
before replacing a bunch of parts you should take voltage readings and try new tubes.
|
10k is reading 14k
__________________
Admiral C322C2 Regent (Restoring)
RCA CTC-7 Pensbury (Restored)
RCA CTC-5 Westcott (Restored)
CRA CTC--4 Director 21 (Restoring)
|