|
Okay so I finally got a decent picture on it, after re-rewounding the flyback with correct thick wire and replacing the High Voltage winding as seen in pictures.The new HV winding measures about 130 ohm, if that maybe tells how much kV it produces, it should be 18kV, but I have a felling its a bit higher then that.
but now that I replaced the HV winding I'm thinking the high voltage might be a bit excessive which can cause x-ray radiation, is that possible ?
I used the winding from a flyback out of a 80s color TV which used a tripler.I need to get a high voltage probe to be sure, but it definitely is a bit high because brightness is very limited.Is there a way to lower the HIGH VOLTAGE somehow without to much complications ??
there is also a problem with bars appearing when there is a bright white dot or face(look at picture 3) what could be causing that ?
but overall not to shabby !
|