Not by the book but turn brightness, color & contrast all the way down.
Adj G-2 up til you see retrace lines then turn down til they go away &
screen isnt lit.
Turn things back up & check that the brightness has good range.
For the color adjustments you need to get into the service menus.
ALLWAYS write down anything you change.
The red problem is probably a leaky driver or the CRT though.....
73 Zeno
Quote:
Originally Posted by Console User
When I bought this TV the G2(Screen) I felt was set a little too high. When viewing just the Back Screen it looked a little bright. I backed down the G2 but still seems a little bright? Any suggestions on the correct adjustment of the G2 (Screen)? The Screen seems to have quite a bit of red color in it. This set has no adjustments that I can find for the Color Hue. It makes the Black& Gray in pictures sometimes have a little red tint. Any suggestions on correcting this or what is causing this would be appreciated. I set the EZ Picture to Customs to make my own settings on the TV. The Digital Preset was way too overdone. Thanks.
|