|
20 Inchers should normally look a little better, but not sure If you'll get it all better
than that.... If you have not done it before, be ready to do it several times to get it
right.....
Before you begin, look at those parts and see if the white glue has not dried
and cracked and let those parts move a little.... You may just be able to move them
back and reglue and be done with it....
Moving the yoke is pretty much for purity, If you don't have a purity problem, then
best leave it alone....
On the other hand, I did a Sanyo DS25250 or something like that, 25" it was horrible
when I got it, the glue cracked, and the entire assembly moved, no clamp.
When I was done, it was almost perfect, I thought my sister was going to take it
back, but she didn't we use it now full time, and it's really got a great picture...
Doing it is a little different than the delta gun set, but you can definitely get these
tubes much better looking....
Don't forget some of these tubes have little magnets actually taped to the tubes to
do fine conv. touchup.... Not sure if you have to remove them or not....
Good luck, please post your results.... !
I wish I would have documented that Sanyo, it's really a great performer and looks
great now..... Although not perfect in one corner, not that it matters it's really on the
edge....
.
__________________
Yes you can call me "Squirrel boy"
|