|
Well, who's got an extra yoke they want to sell....
Thanks for "spelling out" that test procedure for me Zenith26kc20. I appreciate that.
Well I wired in the resistors on the diodes and also disconnect that vert. out. transformer, and hooked it to the variac. I powered the set up, slowly turned the brightness up till I could see a line, then flipped on the variac. Well, when I started applying voltage I noticed the wierd line on the right popped on the screen and(I didn't know how high I should go) I eventually went up to 90 volts with it only growing to about the same size it always has. I didn't want to burn the trans up so I stopped at that 90 and just shut down.
|