|
Hmm that is puzzling, I could have sworn I pulled another 6AW8A out of the 12BY7A socket. Could that have caused the loss of filament on the 6AW8A in the other socket? Then again, I'm pretty sure that there was always a 6AW8A in the 12BY7A socket and I know that at one point the problem tube did glow. Will go and pick up a 12BY7A today just in case and do some investigating on that board.
__________________
Admiral C322C2 Regent (Restoring)
RCA CTC-7 Pensbury (Restored)
RCA CTC-5 Westcott (Restored)
CRA CTC--4 Director 21 (Restoring)
|