[ohohyodafarted]

Thanks for the link Daryl.

I decided to work on the Porta-Color this afternoon. These little GE sets were very reliable, and I was surprised that it did not work when I first plugged it in. I powered it up on the variac, but I did not get any filaments to light. Testing the input voltage confirmed that I did have power to the set. Darn series filaments. Pulled each tube starting at the left rear (left being opposite the tuner) and worked my way toward the tuner. Of course the last tube tested, (4LJ8) in the tuner had an open filament. Murphy's Law! I searched through the tube inventory and found a good used replacement and popped it in. The tubes lit up and I got a raster. I let it sit for about 30 minutes to stablize and then did a few adjustment and was rewarded with a very nice picture. I dont know why the photo has so much grainyness. Screen looks much better in person.