This shaft moves and depresses about 3/8 inch when any of the 14 push buttons on the hard wired control panel is pushed. Nothing else moves.
I hope it would be as simple as just a good lubrication.
http://www.visions4.net/journal/wp-c...s/image164.jpg
The brass gear is the fine tuning gear above the plastic chain drive gear and it looks like it disingages from the chain drive gear which rotates the channel indicator drum. I was able to manually rotate the fine tuning gear to get the tuner fine tuned. Was also able to manually turn the chain drive gear so that the drum would be set to channel 3 for a converter box. I still have no idea which motor, there are 7 of them operate the other functions. It is a 7 function, 14 push button remote. It also has a 7 function, 14 push button hard wired panel which duplicates the remote functions. I was using the hard wired panel because the remote has a special battery which I will need to figure out later.
http://www.visions4.net/journal/wp-c...s/image147.jpg