|
Again (if you haven't already done so), check continuity from the centertap of the Power xfmr's HV secondary to ground.
It should show continuity, and read several hundred ohms (variable a bit with the focus control setting).
What reading do you get?
(EDIT) I just noticed sumpthin' in the schematic concerning the two 80uf filter caps C152B and C152C. The polarity markings are correct, however the symbol for C152C is backward, i.e., The radiused (curved) line is on the wrong side.
Be sure C152C is installed correctly (negative side to point 'C' and positive side to ground).
Last edited by old_coot88; 09-11-2015 at 01:05 AM.
|