|
One question on the electrolytics. C1A and C2A called for 250uf. All I had were 220uf, so I used them. Could that be causing the problem? If so, I'll parallel a 33uf with each before I start bridging new filter caps in.
Also, on the 5U8 AGC rectifier. Pin 1 should be -.9V. I have -5.97V. Pin 9 Sb -.3V. I have -4.27V. I did replace R30 and R31 coming off pin 1. I had replaced C37 when I did the initial recap.
|