|
What I seem to have, I think is called Vertical Flopover. You can tell from the pic, that the man's head is at the bottom of the screen while his chest is at the top. Is this a vertical problem or a sync issue? When I 1st turn it on, the horiz will not sync either, and have to adjust the horiz frequency. Now, pin 1of the 12AU7 Vertical Amp should have between 80 and 148V. I only have 38V.
That pin goes to one side of the Vert Blocking Osc Transformer. Pine 2 goes to the other side and the voltage is ok.
|