Integrators are disc shaped & have 3 wires. Early ones
were dark brown, later ones tan. Part number stats with 87-
The rest of the number is a paint splotch on them. Color
will match the resistor color code. So if you got orange
paint its an 87-3 yellow 87-4 etc. Sometimes the factory
manual or Sams will show the break down of values. If
not there WAS a page out there that listed them all.
Do not confuse them with 3 legged caps that Zenith used.
They were blue or brown & had a 22- part number.
Odds are the crystal is the wrong freq. so DONT go tweaking.
Pull one out of a junker must be a 3.58###.
73 Zeno
